T.M.A.S. - Push Setting Transition for 3D Scope I and II

Table of Contents


    The purpose of this article is to help customers update the push setting on the 3D Scope I and 3D Scope II units prior to SMS node migration. 

    3D Scope I 

    *Note - Windows PC will need to have 32 Bit Java installed and enabled in the browser in-order to access the traffic counter*

    *** Contact techsupport@storetraffic.com if you need the login information for the unit.

    1. Login to the 3DScope I
    2. Select Communication Settings
    3. Select Push Service Tab
    4. Check off Use Push Service
    5. Select HTTPS from SOAP Protocol Type
    6. Input push.smssoftware.net for SOAP server
    7. Click Save
    8. Press OK to following reboot message
      Click to Zoom

    9. Click Service Tools
    10. Select Reboot Device Tab
    11. Click Reboot Device

    The device is now updated and pointing to the correct DNS.

    3D Scope II 

    From a web browser, login to the required units.

    1. Input the password (if needed contact techsupport@storetraffic.com)
    2. Click login for setup

    3. Click Data interface Settings
    4. Confirm or update the SOAP Protocol Type to HTTPS
    5. Confirm or update the SOAP Server Address to push.smssoftware.net
    6. Confirm or update the SOAP Server Port to 443
    7. Click save

    8. Click Service Tools
    9. Click Reboot for the change to take effect

      The device is now updated and pointing to the correct DNS.

    Was this article helpful?

    header-top-left-border Created with Sketch.
    header-top-right-border Created with Sketch.