How To
-
Updating 3DScope II Traffic Counter Firmware
Introduction Firmware updates are essential for maintaining the functionality and...
-
3D Scope II - Video Recording / Player
Overview Customers are recommended to record videos including data (e.g. count da...
-
3D Scope I, II and LC - How to find the IP Address assigned
Overview The purpose of this article is to provide troubleshooting steps for a us...
-
3DScope I / II / IILC - Importing the count log
Overview This article details the process to manually retrieve and import a count...
-
3DScope - How to reset to factory defaults
Overview The purpose of this article is to advise how reset the 3DScope traffic c...
-
3DScope II - Customer Device Calibration
Overview The scope of this article is explain how to perform an initial calibrati...
-
3D Scope II - How to import / delete a License File
Overview This article is to help customers manage the license file included in th...
-
3D Scope II - Time Zone Settings
Overview This article is to explain how to set the time zone onto your device. Ti...
-
3DScope II - How to download the diagnostic log
Overview The purpose of this article is to provide steps on how to obtain the dia...
-
3D Scope II - Login
Overview The purpose of this article is to provide the simple login information t...
-
3D Scope II - How to retrieve the video recordings from the device with FileZilla client
Overview The purpose of this article is to provide a work around process to retri...
-
3DScope II - Multi Sensor Fusion
Overview This article will provide the planning, deployment and configuration pro...
-
How to Stream Live Video from a 3D Scope II
Video streaming allows live camera images to be streamed over the network and vie...
-
How to measure Pass-by traffic
What is pass-by traffic counting? Pass-by counting was developed to help retailer...
-
How to verify if a 3D scope is online and communicating with T.M.A.S.
Overview This article explains how technicians can verify that a 3D Camera is onl...
-
3DScope II - Camera Position - Overview
The purpose of this article is to detailed information about how to calibrate and...
-
3DScope II device - Adding Child or secondary count lines
Overview Use the following process to add additional count lines in TMAS Equipmen...
-
3D Scope II - Group Counting
Overview This article covers how the 3D Scope II camera can count groups, and how...
-
3DScope II - Push Settings for TMAS Hosted Saas
3D Scope II Input the password (if needed contact techsupport@storetraffic.com) ...
-
3DScope II: Staff filtering kit quick guide
Introduction Discover the innovative 3DScope II staff filtering kit, your ultimat...
-
3D Scope I & II LC and HC - Where is the MAC Address?
Overview The purpose of this article is to show customers where the MAC address i...